Steam Engine

A steam engine utilizes the energy contained in steam under high pressure. The energy that is released when steam expands is made to produce rotary motion which can be used for the driving of machinery.



Steam engines were first invented by Thomas Newcomen in 1705, and James made big improvements to steam engines in 1769. The Newcomen steam engine used the force of atmospheric pressure to do the work. In 1712, Thomas Newcomen together with John Calley built their first engine on top of a water filled mine shaft and used it to pump water out of the mine.



The steam from the boiler is admitted into the cylinder in which there is a piston and in which the steam expands, causing the piston to move. When the piston has traveled to the end of the cylinder and thus completed it does stoke, the now expanded stream is allowed to escape from the cylinder.



At the same time the steam is changed over, live steam under pressure being admitted to the other side of the piston, causing the latter to travel back, past its starting point, until it has reached the other end of its stroke. A steam engine of this kind is called double-acting because the force of the steam is applied alternatively on two sides of the piston. While the piston is being forced in one direction by the expanding stream, the spent stream is pushed out of the cylinder on the other side of the piston.



The change over of the steam supply to ensure the admission of live steam to appropriate side of the piston and the discharge of the spent steam on the other side, is effected automatically by a control device called a slide valve. Some steam engines, valves are similar in principle to those used in internal combustion engines. The commonest type is the flat slide valve, also called a D-slide valve.



It alternatively covers the steam inlet port and exhaust port. During the piston movement the slide valve opens the exhaust port for the escape of the spent stream behind the piston (Figs. 2a and 2b). The slide valve must therefore always be in such a position that it connects the working side of the piston to the live steam supply, and opens the exhaust port on the other side to enable the stream to escape into the exhaust channel.Designed for use on a closed system.



The valve performs this operation by moving to-and-fro at the same rate as the piston. It is controlled through a linkage system from the crankshaft such that the valve moves in the opposite direction to the piston. The spent steam that emerges from the cylinder is passed to a condenser where it is cooled and thereby precipitated as water. In some cases it is, instead, discharged direct into the atmosphere.



The term compound steam engine refers to an engine in which the steam is expanded in several cylinders usually three, in successive stages. As a rule, all three pistons have the same length of stroke, since they drive the same crankshaft. However, as the volume of the steam increases as the result of expansion, i.e., when its pressure is reduced, the second or medium-pressure stage has a larger piston diameter than the first stage or the high-pressure stage. The third or low pressure stage has a piston of still larger diameter than the second stage.



The transmission of power and motion from the piston to the crankshaft is effected through a crosshead i.e. a reciprocating block sliding between guides which forms the junction piece between the piston-rod and the connecting-rod. One end of the latter is pivotally connected to the crosshead and other end is connected to the circumference of a wheel or to a crank of the crankshaft. When the piston, piston rod and crosshead move to and fro, the crosshead transmits this movement to the crankshaft or wheel and thus produces rotation. One end of the crankshaft is provided with a fly wheel to ensure smooth running, free from jerkiness due to the reciprocating motion of the piston.



Nowadays steam engines are used only in cases where the slow-running machinery with varying power requirements has to be driven, e.g. for winding gear in coal mines, ships propulsion machinery, rollers, etc. Even the best steam engines have an efficiency of only 15-18% in terms of utilization of the energy contained in the coal.



Looking for leading manufacturers and exporters of Thermowells from India we manufacturer threaded Standard Thermowell, flange thermowell, SS Thermowells, Sanitary Wells, Van Stone Wells, Weld in Wells in SS Thermowells 304, 316, 304L, 316L, 310, 321 and 446?